• It DOUBLES your profit.
  • Mason contractors have bought more Non-Stop Heavy-Duty since1976 than any other elevating scaffolding.
  • The only elevating scaffolding designed specifically for cut-upwalls.
  • The most powerful winch - crank it one-handed, fully loaded.
  • Never run a wall scaffold-high again.
  • The most room - 8 boards up top.
  • No BS Lifetime Guarantee.

If You Increase Your Production 20%,Your Profit will Increase About 20%, Right?

WRONG! Your profit will actually DOUBLE.

Here’s how it really works out:Mason contractors’ bids are about 40% Materials, 50% Labour, and 10% Overhead and Profit.
See how the Labor number is 5 times bigger than the Profit number?
Just knock 20% off your Labour cost and you will DOUBLE your profit.
The money you were paying out in labour shifts over to profit and goes right in your pocket.


The first and only adjustable scaffolding that makes you money on walls ONLY 6 FEET HIGH!

 Bricklayers LOVE to work waist-high. And the big masonry contractors love it when their men work waist-high. Because they make a LOT more money when they do.

 But what about the small and mid-sized contractors who don't have an unlimited budget? What about interior walls and short walls where the big scaffolding is impractical? Standard picks up where other scaffolding stops, and at a price everyone can afford. Standard offers the small contractor the space needed without the cumbersome weight of heavier elevating scaffolding. While easily portable, Standard has plenty of room where it counts and full cubes of material are no problem.

Standard has all the features you asked for, and more, in a mid-sized scaffold:

Light weight Yet Portable
Standard's base tower with elevating carriage and winch weighs only 161 lbs. No component weighs more than one man can comfortably pick up and carry. No forklift - no problem. You can set it between two houses by stabbing it from the side with a long fork, or a piece of pipe slid over your standard fork.

Reliable - It Just Works
Standard's elevating carriage has aluminum rollers to roll smoothly up the tower. The precision winch resists stoppages caused by mortar and debris. Lifetime guaranteed.

Safe, Steady and Stable
The towers won't bend or sway and carriages climb smoothly with no jarring or jolting. Completely safe. Completely steady. Completely stable.

Standard-Duty is the first elevating scaffolding designed for small jobs and small crews. The one-size-fits-all approach of other elevating scaffolding neglects the largest segment of the masonry industry: residential and light commercial contractors. With Standard, everyone will experience dramatic production and profit increases on every job.

More Powerful Winch


The Standard-Duty winch has been thoroughly reconfigured to provide more lifting power than ever. By optimizing the gear geometry, we increased the strength of the winch 100%. In practical terms, that means raising a full pallet of material is a one-handed operation. Since it's easier to crank, the laborers won't avoid it and your bricklayers will always be waist-high to the wall.

As with all Non-Stop products, the new Standard winch is backed by a lifetime warranty. If it ever breaks, we'll fix it or replace it free.




Rigid Towers Don't Sway
The 4'-6" tower extensions are constructed of high-tensile carbon steel and
trussed for maximum flex resistance. Incredible strength is engineered in, not bought by the pound; they weigh only 30 pounds. The extensions bolt together securely using captured fasteners that will never get lost or misplaced.


Smooth Operation
Standard's elevating carriage features aluminum rollers for effortless climbing. By eliminating metal-on-metal friction, the carriage rolls smoothly up the tower. The rollers are mounted on stainless steel shafts, so they can never bind, seize, or rust. And with the new, more powerful winch, the Standard work platform has never been easier to use.


Safety Assured
Standard uses an automatic inertial safety device that cannot be defeated and is unaffected by mortar and debris. In the event of a cable failure, the safety will prohibit the carriage from free-falling, and, since it is completely passive, it does not need to be disengaged or reset.


Winch on the Labourers’ Side


Standard Duty features a winch on the labourers’ side of the platform. The winch handles are in the open bays which means you don’t have to move material out of the way when it’s time to raise the platform. 


Flexible Work Platform


A. Laborers' platform supports 3 boards.
B. Two masons' walkboards. Boards store neatly under workbench until needed.
C. Two boards for the masons' workbench.
D. Laborers' platform has four boards in the open bays where you land materials.
E. Three bonus stocking boards under the workbench in open bays.



Standard Duty Component Diagram and Parts List

A. 9' Base Tower - 91 lbs.
B. Elevating Carriage - 119 lbs.
C. Winch and Pulley Assembly - 66 lbs.
D. 9' Tower Extension - 70 lbs.
E. 4'-6" Tower Extension - 31 lbs.
F. X-Brace - 16.5 lbs.
G. Carpenters' Bracket - 28 lbs.
H. Wall Tie-In Bracket - 10 lbs.
I. Straight Brace - 13 lbs.
J. Adjustable Straight Brace - 13 lbs.
K. Pilaster Plank Arm and Clamp - 23 lbs.
L. Masons' End Guardrail Panel - 22 lbs.
M. Leveling Jack - 13 lbs.
N. Overhead Protection - 98 lbs.
O. Forklift Bar - 40 lbs.
P. Inside Corner Bracket - 46 lbs.
Q. Inside Corner Bracket - 13 lbs.
R. Guardrail Post - 7 lbs.
S. Laborers' End Guardrail Panel - 17 lbs.
T. Access Landing and Guardrail - 117 lbs


Technical Specifications
Maximum Weight Capacity per Pair - 2800 lbs
Maximum Working Height - 80 ft
Labourers Platform - 3 boards (4 in open bays)
Masons Workbench - 24"
Masons Walk Platform - 0 to 24"
Wt per Base Tower with Carriage & Winch - 150 lbs
Face of Wall to Back of Scaffold - 7'-1"
Tower Width - 14"


Back to the top